If you have details about a boat you would like to see featured please email me.

We are seeking contributing authors to join us and post on a regular basis - see details scroll down the right hand column

Thursday 10 March 2011

Onawind Blue

Onawind Blue is a 15 foot Light Trow designed by Gavin Atkin and fellow blogger of In The Boatshed. The Trow was in part inspired by a traditional working boat from a very unusual stretch of protected water on the Dorset coast known as the Fleet, which is enclosed behind the gravel banks at Chesil Beach.

The traditional Trow was a heavily built, flat bottomed boat, Gavin has bought the design up to date with much lighter ply construction adding some influence from Dory designs and providing a sailing rig. The result is the Light Trow.




Based on the Mediterranean coast of Spain Ben Crawshaw has documented the build of his Light Trow - Onawind Blue and then followed up with his sailing and rowing exploits on his blog The Invisible Workshop




What's very interesting about The Invisible Workshop is how Ben involves his readers rowing and sailing Onawind Blue in very different waters to those from which the design originated. It is fascinating to watch as Ben develops his skills and experience with the boat, pushing the boundaries of her capability.



Ben's voyages demonstrate that you don't need a mega yacht to go sailing, even in the open ocean. His crossing to Ibiza takes courage, skill and a well found boat which he clearly has in Onawind Blue. His sailing also interweaves with the strong regional Catalan culture in which food plays an important role. Cooking on an open boat can be a challenge, but sailing out in the early morning to enjoy breakfast on the clear and sunny Mediterranean is clearly something special.




2 comments:

  1. This is really satisfied by the nice services in this blog that to really providing the wonderful info is visible in this blog

    ReplyDelete
  2. How can we get a more detailed drawing of how the sail controls are rigged/managed? The plans on Duckworks don't seem to show how to rig/run sheets.
    Thanks.

    ReplyDelete