If you have details about a boat you would like to see featured please email me.

We are seeking contributing authors to join us and post on a regular basis - see details scroll down the right hand column

Wednesday 2 September 2015

Tricorn - An early all-GRP cruising dinghy

The Tricorn dinghy was designed by Illingworth and Primrose in 1962. Since theirs was one of the most famous names in offshore racing yacht design at the time, she came with some impressive pedigree. The design brief appears to have been to create a low maintenance dinghy, capable of serious open water passage-making, that would be better and faster than Ian Proctor's well proven and famous Wayfarer class.

Back then in the early 60s there were very few dinghies purpose-designed for construction in GRP. Almost certainly this was the first boat to be designed by Illingworth and Primrose for this type of construction, and at the time the Wayfarer would only have been available in plywood, so although Angus Primrose had certainly designed dinghies before, the Tricorn brief must have come as a considerable new challenge. His approach, in common with most other designers who were learning to work with this little known material, was to make the boat strong and not to spare on materials. When you examine the layup of a Tricorn, you'll notice a predominance of woven rovings throughout, and lots of reinforcement in areas where a contemporary wooden or plywood dinghy might have had a tendency to develop stress cracks or other weakness.

Very unusually for such an early fibreglass boat, there is almost no wood, except for the tiller, rudder, and some backing pads for deck fittings. This may have been a bit too avant-garde for the times, since boat enthusiasts in those days would have expected quite a lot of visible wood trim, coamings, decks, floorboards, benches, hatches, etc. The all plastic Tricorn might have been regarded as just too space-age and factory produced, and this perception, as well as its price and the narrowness of its marketing concept, may have seriously limited sales.  I’m not sure how many were built, but it’s certain that few remain in serviceable condition.

Not that there was anything wrong with the performance of the Tricorn, nor its ability to shelter its crew of 2 adults, plus maybe a child, for overnight camping stops. Contemporary boat tests make it clear that Tricorn had the edge over the Wayfarer in both departments, although nowadays, after 50 years of Wayfarer class development, the Tricorn would probably struggle to keep up on some points.

Almost certainly, however, Tricorn would still show a Wayfarer a clean pair of heels to windward, since with her centreplate fully down she draws 1.6m (5ft 3in) to the Wayfarer's 1.17m (3ft 10in). She is also a few inches longer overall and carries around 1sqm more windward sail. Compared to the Wayfarer, Tricorn is noticeably less stable at rest, though she stiffens up when under way.

Tricorn's domed foredeck and short cabin roof enclose a cuddy with sitting space for 2 or 3 adults or sleeping space for 2 (in berths extending under the cockpit side benches). There would be just enough space left over in camping mode for a child of up to about 7 years old to stretch out. There's a large watertight locker aft, and two capacious cockpit side lockers, probably not really totally watertight in the event of capsize, but which resist rain, spray, and even a fair amount of solid water landing in the cockpit.

Some years ago, I found and bought an old Tricorn. It was very scruffy, had a hole in the bottom, and lacked its original moulded forehatch cover as well as the original winch for lifting the centreplate. This 1963 example had at some time been used as a sailing school boat and was fitted with a horrible non-original rusty steel plate, weighing in at 50kg or more, double the original design spec. In addition, the mainsail had been reduced in area by cutting the foot off it to a depth of about 1m. These modifications must have made her extremely slow and dull to sail.

Salvo is now back in sailing order with a few minor changes to her original specification. I changed the overweight rusty centreplate to one that weighs about 20kg, about the same as the original design, but mine is home-made from a sandwich of steel, epoxy and plywood. I had to give up on finding an original plate lifting winch and fitted a simple tackle instead. I made a forehatch cover from plywood and clear polycarbonate, and lastly, I changed from a transom mainsheet track to centre sheeting for no better reason than I was scared the sheet might foul on my outboard motor and cause a capsize. The old roller reefing boom was replaced by one from a Fireball, to which I fixed some fittings for slab reefing.

I made a new rudder blade cut from the plywood centreboard from an old Miracle dinghy, but it snapped in half in a fearsome tiderace in Brittany, so I have gone back to the original which I might reproduce in aluminium plate.

There are still a couple of niggling problems which I will get round to sorting out one day.  For instance the original self bailers let more water in to the watertight cockpit than they remove, so my feet are always wet. The in-mast jib halyard emerges from the mast foot in such a way that it is difficult to tension properly.  I'm considering making it external from a point just below the spreaders so that I can swig it up tight. (Edit: Now successfully modified).  Most importantly, because of the total lack of rowlocks, a rowing thwart, and a stowage space long enough for decent oars, it's impossible to row the boat in the event of flat calm and engine failure. Emergency propulsion consists of a long paddle at the moment.

In spite of the age of the design, and these very minor shortcomings, I like my Tricorn.  She is a fine, strong, and capable boat - with a top class pedigree!  

UPDATE 

Sailing performance:

Her performance under sail is excellent.  She is faster and more weatherly than most serious cruising dinghies of similar size, even many well-known highly regarded modern designs.  Her fittings and gear are strong, sound and serviceable.  The rig is simple and, on dry land, the mast can be raised and lowered singlehanded.  The new sails are of the highest quality.


Safety:

In very rough seas the closed-off cabin and self draining cockpit largely eliminate the risk of swamping.  The cockpit will free itself of water automatically within a couple of minutes while the boat sails on.  However, even in the unlikely event of a disastrous total flooding, Salvo’s hull contains enough buoyancy to remain afloat.

Salvo sails well under reefed sails.  In very severe conditions Salvo is capable of making safe harbour under sail with 3 reefs in the main and the small jib set, like a cutter’s staysail, well back from the stem head.


Practicality:

The Tricorn is designed for fast coastal cruising.  Relatively high freeboard helps shelter the crew from spray.

The lockable cabin provides permanent onboard dry storage.

The draining cockpit enables the boat to be left unattended on a mooring indefinitely.

Cockpit lockers are lockable and weatherproof.  The outboard motor can be stowed out of sight and out of the way in the lazarette.

The hull design offers good load carrying capacity for heavy camping or extended cruising equipment.

The electric outboard is powerful, ready for instant use without any starting problems, and has forward-neutral-reverse modes.


What are the weaker points?

Salvo’s cockpit drains let water in as well as out, so you often have wet feet.  Fitting new bailers that seal properly would probably solve this problem.


Cabin access is awkward through a small hatch.  It can be a tight squeeze for a person of average size, and requires flexibility and agility.  Once in, there is just enough space to shelter 2, maximum 3 persons, though, on the plus side, it is dry and warm and you don’t need a cockpit tent.


Pretty much like most other boats that don’t have a centreline outboard well, manoeuvring Salvo under outboard motor, transom-mounted on the starboard quarter, can be tricky.  The turning circle is large unless the plate is down, the rudder becomes ineffective at low speed, and the bows tend to blow off.  The outboard prop can come out of the water and lose traction if there is a man on the foredeck. 


The Tricorn is initially a relatively “tippy” boat for its size.  Onboard you need to trim correctly and not jump about.  On the other hand, once sailing, she feels steadier and her generous freeboard means you would have to be very, very clumsy or very unlucky indeed to suffer a capsize.


Salvo is now equipped for sculling when necessary for brief harbour manoeuvres!



Salvo at La Semaine du Golfe du Morbihan, 2019


Tricorn Sailing Dinghy
Designed by Illingworth and Primrose, 1962
Built by Martin Goacher Ltd.

LOA:  16ft 6in (5m03)
LWL:  15ft (4m57)
Beam:  6ft 2in (1m87)
Draft:  9in (0m22) plate up, 5ft 3in (1m60) plate lowered.
Air draft:  24ft 6in (7m46)
Sail area:  139 sq ft (12.91sqm)
Weight in sailing trim (inc. rig, sails and outboard motor) approx. 580lbs (263Kg)

Link: http://bursledonblog.blogspot.co.uk/2012/05/tricorn-dinghy.html

42 comments:

  1. Congratulations on your restoration. She looks good. I love the Wayfarer dinghy and have enjoyed reading about her ocean voyaging and coastal sailing but if I had to choose I would choose the Tricom - She looks great!

    ReplyDelete
  2. You might find this of interest...http://bursledonblog.blogspot.co.nz/2012/06/small-world.html

    ReplyDelete
  3. Thanks Paul - I took a look again at Max's blog and saw your boat. The Whiting looks very similar to the Tricon in concept, a concept I like a lot. Do you still have her? Are you able to sleep inside your little cuddy cabin?

    ReplyDelete
  4. Great boat! Glad she is now in your capable hands. This is a boat who's time has come again. Someone should start making her again.

    ReplyDelete
  5. Hi Alden, yes I still have her,don't think I could ever part. Two can sleep in the cuddly as long as they are good friends,but the cockpit is the crowning glory with the room of a thirty footer. Again like the Tricon

    ReplyDelete
  6. Paul, I really like the look of your Whiting. The Tricorn's cockpit, though it looks big, is cluttered a bit by the long c/b case, and the big locker aft takes up a lot of space. The Whiting seems to have plenty of unencumbered cockpit space, and the look of a bigger boat.

    ReplyDelete
  7. Thanks Patrick,like the Tricorn, sadly also no longer in production. In my view she is just about the perfect concept for an easily handled (afloat and ashore) trailer yacht.

    ReplyDelete
  8. Patrick thanks for posting such an interesting thread, I like both the Tricorn and the Whiting - for a while I've had my eye out for an old Westerly Nimrod at the right price, but I think both these boats are better. Having just finished a 5 year restoration or Erica's SCOW (work and life got in the way far too often) I'm of the opinion that building from scratch can be quicker and easier. To Alden's point might be worth trying to find a designer who could produce an updated version - or maybe update the lines into Defltship if I find some time over winter would be a start and then take the best from each to redesign the cockpit/interior.

    Best regards

    Max

    ReplyDelete
  9. The fascinating beauty of Arabian Sea, High Buildings, moonlight evening on Yacht, Clear Water and Delicious Buffet on a luxury yacht will make your voyage fabulous and unforgettable.

    ReplyDelete
  10. Wonderful blog! I never ever read such kind of information that imparted me great knowledge. Port St Lucie Erosion Control

    ReplyDelete
  11. Thanks for the info. Here's my input Get best Marine Engine Parts manufacturer visit: http://www.hohyuninc.com/

    ReplyDelete
  12. The boat looks gorgeous. You did a phenomenal job on the restoration. Thank you for the post!

    ReplyDelete
  13. Nice blog about boats. If you want to have a tour on a boat in Manhattan or jet ski in NYC, plese contact us from the links below


    The most important things about new york city water tour services is that you can enjoy something new with some of the best tourist locations in the country. There are always better opportunities and options with New York city tours that turns out to be the best services of recent times. Carry along all your loved and special ones to all exotic and special places of the country

    ReplyDelete
  14. This blog Info is fabulous; I must wanna see best more from your writers. yacht brokers florida

    ReplyDelete
  15. wonderful boats and lovely nice informative blog i really appreciate you i was searching for Boat Cruise Dubai tours i just found your blog it is pretty much helpful and best thanks for sharing such a kind post keep it up.

    ReplyDelete
  16. I really like how your class timings of your blog. I enjoyed reading your blog and it is both instructional and interesting.Thanks!
    Thessaloniki sailing | Yacht charter Greece

    ReplyDelete
  17. First of all, i would say your this post content has more informative and interested . i like this post a lot, there i got lot of things.

    ReplyDelete
  18. Driving back from St. Andrews New Brunswick, quite by accident, came across the Tricorn which my father bought on the day I was born June 14th, 1962. We lived in Port Cartier Quebec at that time, and then moved home to New Brunswick. Dad sold it in 1965 when he bought a 32 foot wooden schooner that had just been built in Chester Nova Scotia, on spec.

    If I take her and do fix her up I hope to do as good as you have done. Nice work. She is going to need a lot of work, but if anyone is going to fix up the old girl it should be her long lost twin brother. :-)

    ReplyDelete
  19. Here is my facebook page with photos taken today of M'Lady in her present condition.
    She was built in 1962. Not sure of hull number as the builders plate has peeled off in places.
    https://www.facebook.com/photo.php?fbid=1051391631593939&set=pcb.1051394651593637&type=3&theater

    ReplyDelete
  20. James - nice boat - incredible really that a boat which must be 50 years old is in such good or at least easilly repairable condition

    ReplyDelete
  21. Hi Patrick, look like a good job.
    If you need some materials or help on further restoration feel free to contact me. I have a friend of mine working on similar boats for customers of our boat shop.

    George
    http://www.jon-boats-for-sale.com

    ReplyDelete
  22. This is the perfect blog for anyone who wants to know about this topic. Almost certainly this was the first Seafarer boats of any type designed by this company.
    Seafarer boats

    ReplyDelete
  23. Thanks for sharing the info, keep the good work going.... I really enjoyed exploring your site.Good resource.
    Donate your Boat

    ReplyDelete
  24. Great information! The Tricorn dinghy looks great after your restoration work. Tricorn seems to be the early version of modern sailing boats, which vacationers often charter for sailing vacation destinations such as Cancun. Thanks for the post!!

    ReplyDelete
  25. This story reminded me of how I began in the great hobby of building boats.

    As a child, my dad would take me to the harbor and I would watch the boats bring in their catch for the day. It all seemed very magical to a young boy.

    I started building tiny model boats but due to our familie's financial situation, I could never graduate to building a "real" boat.

    Fortunately, when I grew up and started working, I was able to afford to build bigger boats. However, the plans that I found were incredibly difficult to understand and I never got past the "half-finished" stage.

    I was on the verge of giving it all up. Luckily for me, I came across some easy-to-follow instructions that have allowed me to complete some wonderful boats.

    I could go on and on, but you would do well to check out the plans for yourself:

    http://www.bestquicktips.com/boatplans

    Hope it helps anyone reading this!

    ReplyDelete
  26. Choose your luxury catamaran in Dubai and book it with Yachts rental Dubai, the leading Yacht Charter Company in Dubai. Request a quote online.

    ReplyDelete
  27. Only 37 built ? - curious, my sail no is 55 ("Sandpiper" is in the process of being "rebuilt").

    ReplyDelete
  28. A problem with the Tricorn not mention so far was the weakness of the cabin roof. The rig bore down mightily in winds above force 3 and the lee shroad flapped about. I made an aluminium king-post which incorporated a screw-jack. This stood on apurpose built plate on the inner surface of the hull where the keelson would be in a wooden boat. Slim crew could enter and leave the cabin with the king-post in situ but it was easily removed and replaced if necessary. The king-post considerably improved rig stability at sea.

    ReplyDelete
    Replies
    1. Thanks for the information about providing extra support under the mast. Will bear it in mind when reassembling the boat; the cabin mould is off the boat at the moment (Sail No 55)

      Delete
    2. Very interesting, I noticed when sailing mine that the lee shroud seemed to go slack and didn't understand why. Seems so blindingly obvious now you explain it!

      (I was less experienced back then... I'm better now, but still a novice at boat building/repairs.)

      So I've been looking at making my own king post recently. Problem is finding somewhere strong enough to ground it. Don't know about yours, buy my cabin floor is foam-filled, it's flat all the way across so quite deep in the centre but shallows out towards the sides as the hull tapers up.

      I very much doubt that foam is enough to stop the cabin roof from flexing under the pressure of the mast. I did consider running a beam all the way across the floor to the sides of the boat where the foam stopped, which would give me a stronger platform for mounting the post, but then again even a fairly chunky piece of timber I imagine would still have enough flex for the Lee shroud to go slack.

      It appears a previous owner has already cut a cylindrical hole out of the foam floor for pumping out the bilge, I could consider dropping something in there to support it from the bottom, but this existing hole is too far aft for the mast, it is directly underneath the slightly sloped main hatch.

      So after all that I thought... do I actually need it? Is the cabin roof likely to give way and fail/crack?

      Don't get me wrong I like the idea of a king post, I'm an over-engineer kind of mentality because when you're out on the sea in frightening conditions it's better for something to be slightly too tough than slightly too flimsy! But looking at the complications of it, and the very little time I get to work on that sort of thing, I'm wondering if it'll get along ok without?

      Delete


  29. PrimeX Testo Max :- Aside from this PrimeX Testo Max is a mix of just normal and dynamic fixings which help the buyer to create the testosterone normally from their own. This item enhances the vitality level and stamina in guys body which helps in performing substantial exercise sessions. It expands the want for sex and other sexual exercises. With expanded level testosterone in man's body causes them to created conditioned muscle body. To know more insights about this item, continue perusing this survey. Every single jug of PrimeX Testo Max contains 60 pills.
    Read more==>> http://newmusclesupplements.com/primex-testo-max/

    ReplyDelete
  30. Hi Patrick. Looks like you've made an absolutely fantastic job on Salvo, very admirable.

    You might've seen my reply on bursledonblog, but didn't think it'd harm to copy paste in here as well. It would be interesting to get in touch with fellow Tricorn owners with it being such a rare boat.

    I bought one back in 2015, but it's in a bad way. I have managed to get out on it a couple of times, but it was clear how much work needed doing. I even have a youtube video of me sailing it if you're interested.

    I absolutely love the design - swing keel, lightweight yet still slightly ballasted, massive open cockpit, small cuddy to stash all your gear and even curl up in for a break from the elements.

    I didn't want a project boat because I just don't have the time, didn't realise how much work it needed at first. But I just can't bare to part with it because I love the concept/design of it so much.

    I've been making very very slow progress over the last few years. I'm very far from an expert at this sort of thing either so there's been a lot of difficult decisions and various challenges to overcome.

    But I feel like I'm starting to get somewhere recently and am really hoping it gets to see a bit more action this summer.

    ReplyDelete
  31. We can put a model of "gulet" which is the hand made wooden boat to in this 1001 boats page. This is traditional wood boats made in Turkish shipyards.
    Usually, we have for 7 nights 8 days charter tours but it can be longer or shorter periods too.
    Please check all these gulet type boats from following page 👉👉 click here

    ReplyDelete
  32. We offer crewed rental boats in Turkey, Mediterranean Sea. Our all the yachts have a/c, crew, water sports and luxury comfort. You and your guests can rent one of our yachts for 7 nights or less or more! Please find additional information from this 🌎👉👉 website. You can have speak with one of charter broker or just send us an inquiry by e-mail. Find your dream vacation at sea with Mirya Yachting.

    ReplyDelete
  33. Its very nice article this is informative post thanks for sharing this is great article thanks for sharing!!

    Campsite with pool Andover Ohio

    ReplyDelete
  34. Where we can buy Tricorn Sailing Dinghy? I'm looking for this type of boats in Turkey. We have a small gulet for cruising but this type of boats not for pro sailing, as you knows they are for cruises. here is my link https://bluecruises.net

    ReplyDelete
    Replies
    1. Unfortunately they have'nt been manufactured for many years..

      Delete
  35. Thank you for perfect information !

    Please check our website: https://miryaguletcharter.com/

    ReplyDelete